Attempt to pair a motion sensor results in an error

If you are attempting to pair your motion sensors to the TYPE-R and repeatedly getting an error, please try the following:

• Reset the motion sensor and try again:

1. Reset the sensor by sliding the motion sensor in and out of the sensor charger*. The LED should light blue when the reset is finished. 
   * If you do not have the charger on hand, use a thin object such as a paperclip to press down for one second on the button located in the small hole on the back of the sensor (you can feel a click when done correctly).
   
2. Try pairing the sensor again.

• Restart the TYPE-R and try again:

1. Hold the power button on the TYPE-R for 3 seconds and tap "Power Off" and power off the TYPE-R
2. Power on the TYPE-R
3. Try pairing the sensor again.